Concrete Grinders are typically used to remove glues, coatings, membranes, high spots or to prepare concrete for new floor coverings and paints. Machine selection will vary depending on the area, access and power available.
At DIY Grind we will make sure the correct concrete grinder rental equipment, and more importantly the correct diamond tooling, is selected so your job is completed quickly and cost effectively.

All grinders are fitted with dust shrouds so a specialized vacuum can be fitted for dust reduction.
Please contact us today at This email address is being protected from spambots. You need JavaScript enabled to view it. or 0243141911

5inch grinder for use concrete on walls and in small hard to reach areas. Can come with or without a dust shroud for connection to a vacuum Click Here for Vacuum. 

150mm Festool Renovator grinder for use concrete on walls and in small hard to reach areas and benchtops. Comes with a dust shroud for connection to a vacuum specific for Festool

9inch hand grinder fitted with flip-up front shroud for edge grinding. Polyurethane dust shroud connects with vacuum. Fitted with a vacuum the process is dust free refer to vacuum small. Click Here for Vacuum.  

A 240volt grinder for residential grinding jobs and tight commercial flooring jobs. Tooling can be quickly changed to remove glues, paints and coatings Also good for honing alfresco and outdoor areas around pools and sheds. This grinder can be used for concrete and timber floors

Attaches to our small or medium vacuum for dust free grinding. Click Here for Vacuum.

A very powerful 240volt grinder for large residential grinding jobs and commercial flooring jobs. Tooling can be quickly changed to remove glues, paints and coatings.

Attaches to our small or medium vacuum for dust free grinding. Click Here for Vacuum.

Large powerful 415volt grinder for rapidly preparing concrete and for polishing concrete. Works very well removing carpet glues, vinyl glues, coatings and membranes. Also good for honing down lumps and bumps and polishing concrete floors. This is a four head machine which means it will grind the floor very flat.
Attached to our Large Vacuum for dust free grinding. Connects to large vacuum 415v for dust controlled grinding. Click Here for Vacuum.

Lavina® 25L-X features 25 inches of working area, and a powerful 15 HP motor. It uses three standard 9-inch heads for grinding and polishing, but can be converted to Lavina 30L-X with three 13.2-inch heads, and a low profile base, designed to reach beneath cabinets and shelving. Works very well removing carpet glues, vinyl glues, coatings and membranes. Also good for honing down lumps and bumps and polishing concrete floors. 
Attached to our Large Vacuum for dust free grinding. Click here for vacuum. 

10" working width wet grinder that is petrol powered. Perfect for areas of heavy grinding such as pebblecrete or grind down bumps where power is not an option or wet grinding is needed.

Lavina Propane grinding and polishing machines are well known for their ease of use, high productivity and versatility, and the new X models offer even superior performance. Lavina 25G-X features three standard 9-inch heads. Works very well removing carpet glues, vinyl glues, coatings and membranes. Also good for honing down lumps and bumps and polishing concrete floors. 
Attached to our Large Vacuum for dust free grinding. Click Here for Vacuum.

Large powerful remote control grinder. For rapidly preparing concrete and for polishing concrete. This is a four head machine which means it will grind the floor very flat. All functions can be controlled by the remote; speed of Heads, Drive Speed and Oscillation. Capable of full polish from rapid stock removal and up to the final 3000 grit polish. Can also do floor preparation, glue and paint removal. Battery back up allows grinder to be driven around when disconnected from mains power. Connects to large vacuum 415v for dust controlled grinding. Click Here for Vacuum.